The Hakko FX100-04 soldering system brings induction heat soldering technology to an even higher performance level. This small, compact station includes microprocessor control that boost the recovery performance of the soldering iron tip, and an Advanced System Design optimizes performance by reducing the loss of power in the system while maintaining the lowest EMI levels to meet applicable standards, especially for work with sensitive devices.
The system is simple to operate — just plug it in and turn it on. No calibration required.
Features:
Soldering Station:
Model Name | FX100 |
Part Number | FX100-04 |
Voltage | 120V |
Power Consumption | 85W |
Temperature Stability & Accuracy | Meets or Exceeds UPC J-STD-001 |
Output Power | 50W |
Output Frequency | 13.56 MHz |
Weight | 6.6 lb. (3 kg) |
Dimensions (W x H x D) |
8.3 x 1.9 x 8.9 in. (210 x 49 x 226 mm) |
Handpiece:
Model Number | FX-1001 |
Part Number | FX1001-51 |
Tip-to-Ground Resistance | < 2 ohms |
Tip-to-Ground Potential | < 2mV |
Length of cord | 4.3 ft. (1.3 m) |
Total Length (w/o cord) | 7.5 in. (190 mm) w/T31-02D24 tip |
Weight (w/o cord) | 0.07 lb. (31 g) w/T31-02D24 tip |
Tips (not included) | T31-01 Series = 840°F (450°C) T31-02 Series = 750°F (400°C) |
Reach | 4.3 ft. (1.3m) |
Heating Element | High Frequency Induction-Type |
Contents:
Part Number | Description |
FX100-04 | FX-100 Soldering Station w/ FX-1001 Soldering Iron |
FH800-51BY | Iron Holder |
B2300 | Heat resistant pad |
B2419 | 3-wire Power Cord |
B5006 | Yellow Soldering Iron Grip (Installed) |
B5007 | Green Soldering Iron Grip |
B5008 | Gray Soldering Iron Grip |
N/A |
Instruction Manual |
APPROVED |